Skip to main content

Sika — Injection repair

Sika Injection / SikaInject

Specialist resins for selected water ingress, crack and joint repair conditions.

Sika Injection / SikaInject product image
Current familyProduct family
  • Injection repair
  • Joints
  • Cracks & leaks

Verify before you specify

A current product family. Choose the exact grade from the manufacturer data sheet.

Check the current manufacturer technical data sheet for this product and market.

What it is

Injection resin family (PU, acrylate and other chemistries depending on product).

Specialist resins for selected water ingress, crack and joint repair conditions.

Where to apply

Leaking cracks and joints only where the resin's chemistry and structural role are appropriate.

Application overview

  1. Diagnose the defect.
  2. Install ports/packers.
  3. Inject using the approved equipment and pressure.
  4. Close ports after curing.

High-level steps only. Mixing, coverage, thickness, timing and curing come from the current data sheet.

Technical controls

What the applicator must check before and during the job:

  • Resin chemistry
  • Crack movement
  • Moisture
  • Viscosity
  • Pot life
  • Pressure
  • Safety precautions

Official documents

The library may be a regional site. Confirm the data sheet matches the product and market you are buying.

Image and source status

Product image supplied from the manufacturer's published material.

Disclaimer

Check the current manufacturer technical data sheet for this product and market. Installation must follow the current TDS/SDS and the project specification.

Not sure this is the right product?

Construction problems are not always solved by choosing a product from a catalogue. Tell us what you're working on, what problem you're experiencing, and what surface or structure is involved — we'll help you identify the appropriate solution.